Wednesday, March 21, 2012

Kidde PI2010 Smoke Alarm Dual Sensor with Battery Backup, White

Kidde PI2010 Smoke Alarm Dual Sensor with Battery Backup, White
Price : $30.09
List Price : $39.99
You Save : $9.90 (25%)

Item Description


Amazon.com Item Description
The Kidde PI2010 Battery-Operated Dual Sensor Smoke Alarm combines photoelectric and ionization sensing technologies into one unit to offer broad detection against smoldering and flaming fires. Professionals advise that for optimal protection you have each varieties of sensing technology in your residence. This smoke alarm's trademarked Hush function will allow you to silence nuisance alarms, even though an indicator LED and test function let you readily confirm that the alarm is working.

The Kidde PI2010 Smoke Alarm:
  • Employs each photoelectric and ionization sensors.
  • Attributes a hush button to silence the alarm for non-emergency scenarios like a smoky dinner.
  • Compact design blends in seamlessly with your home decor.
  • Wire-in smoke alarm with 9V battery backup.


With two numerous sensors, you are going to get warnings sooner no matter the sort of fire. .
Be assured of your home's safety with the PI2010 smoke alarm. .Dual-Sensor Engineering for Enhanced SafetyExperts divide home fires into two groups: flaming and smoldering. Flaming fires result from flammable liquids and cooking accidents, when smoldering fires most frequently take place when smoking materials, such as cigarettes, are left unattended. Ionization smoke sensors may perhaps detect smaller, less visible fire particles, like those made by flaming fires, sooner than photoelectric sensors. Even so, photoelectric sensors are can detect bigger, significantly more visible fire particles, such as those developed by smoldering fires, sooner than ionization sensors. Each have to pass identical efficiency standards to get third-party approval and meet Underwriters Laboratories (UL) 217, the independent normal to which alarms are listed. Considering that you don't know what kind of fire you will have in your dwelling, professionals advocate installing each varieties of engineering for optimal protection.
Professionals Advocate Protection from Both Sorts of FiresVirtually just about every recognized fire authority recommends the installation of both ionization and photoelectric alarms in order to maximize protection from either flaming or smoldering fires. Kidde provides photoelectric smoke alarms, ionization smoke alarms, and dual sensor alarms, which combine both technologies in 1 unit. Regardless of the engineering, the most very important thing is to make sure that you have working smoke alarms on every floor of your dwelling, inside every single bedroom and outside sleeping places. Studies show putting alarms in both bedrooms and hallways could increase a family's escape time by up to 15 minutes.
Fire Authorities recommending each smoke alarm technologies:
  • National Fire Protection Association (NFPA)
  • International Association of Fire Chiefs (IAFC)
  • U.S. Fire Administration (USFA), the National Institute of Standards and Technology (NIST)
  • Consumer Product Safety Commission (CPSC)
  • Consumer Reports
  • National Association of State Fire Marshals (NASFM)
  • Underwriters Laboratory (UL)

  • Trademarked Hush Function for ConvenienceBy pressing the Hush button, you can quickly and safely silence nuisance alarms brought on by non-emergency circumstances, such as overcooked dinners.
    This feature desensitizes the alarm for roughly seven minutes. In the course of this time, the alarm chirps every single 30 to 40 seconds. If the smoke is as well dense, the Hush feature is overridden and the alarm still sounds, and the alarm automatically resets at the finish of the seven minutes. This hassle-free security measure eliminates the temptation to take away the alarm's battery, which creates an unsafe scenario.
    Wire-in Smoke Alarm with Reliable 9-Volt Battery Backup, Indicator LED, and Test FeatureBecause a smoke alarm only aids defend you if it is operating, this unit features a red LED that flashes just about every 30 to 40 seconds to indicate that it is operating properly. For additional peace of thoughts, the alarm contains a test/reset button that enables you to periodically test its circuitry and horn.
    The PI2010 is a wire-in smoke alarm with 9V battery backup, which provides continuous protection against smoke and fire hazards even in the course of power outages. The unit presents a low battery warning that concerns a short chirp just about every 30 to 40 seconds for at least seven days ahead of losing power, letting you know it is time to adjust the battery.
    The unit measures just five.75 inches in diameter and 1.8 inches deep, and it attributes a neutral, white finish. It functions tamper resist capabilities to deter vandalism or theft.
    This dual-sensor smoke alarm is UL listed, so you can be confident of its good quality, and it is backed by a ten-year restricted warranty.
    About Kidde: A UTC Fire Safety BrandRenowned for worldwide leadership in fire detection and suppression, Kidde delivers options ranging from portable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems.
    Kidde is a UTC Fire Safety brand, with a history that is wealthy with innovations, from the patent of the Chubb Detector Lock in 1818 to the development of the world's 1st wireless networked smoke detectors in 2004.
    What's in the BoxDual Sensor photoelectric/ionization smoke alarm with mounting bracket and mounting hardware, 9-volt battery, ten-year restricted warranty, and bilingual user's manual.

    The Kidde PI2010 is a breeze to operate and has a hush function to temporarily silence alarms.

    From the Manufacturer
    The Kidde PI2010 is a 120VAC, wire-in smoke alarm with 9V battery backup. This smoke alarm functions as a stand alone unit or in an interconnected method. The Kidde PI2010 functions hush, permitting you to promptly silence nuisance alarms and also consists of a tamper resist characteristics that deters tampering and theft. The PI2010 contains a speedy connect power harness that will allow for quick and hassle-free installation. This smoke alarm combines both photoelectric and ionization sensors. Ionization sensing alarms could possibly detect invisible fire particles (related with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms could detect visible particles (related with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to assist insure maximum detection of the several forms of fire that can take place within the home. The Kidde PI2010, 120VAC, wire-in smoke alarm with 9V battery backup supplies continuous protection against smoke and fire hazards, even through power outages. The mixture of ionization and photoelectric sensors offer the finest protection against both rapidly flaming and slow smoldering fires. The Kidde PI2010 interconnects with up to 24 Kidde devices of which 18 can be initiating. This unit also consists of flashing LEDs to signal the alarm is functioning adequately, a low battery warning and a loud 85dB alarm. The Kidde PI2010 is UL Listed and contains a ten year restricted battery.
    Kidde PI2010 Smoke Alarm Dual Sensor with Battery Backup, White

    Client Critiques


    I did not know about replacing smoke alarms each decade until rather recently. The units in my dwelling had been two decades old, hardwired AC with no battery backup. They tested fine but immediately after twenty years it is undoubtedly time to replace them by any regular. There are 3 in my household, 1 on each floor.
    Just after undertaking a bit of research and becoming a smart consumer, I decided the PI2010 was the very best selection out there. I bought them up at a nearby big box house center for the reason that the price tag was extremely competitive with Amazon and I did not have to wait for shipping (even zero cost super saver shipping).
    In the box was a mounting bracket, three-wire harness, instructions, screws, and the smoke alarm.
    Installation was a breeze - shut off the power at the circuit breaker initially, removed the old alarms and harnesses next. The directions with the PI2010 made it clear to not pull out the battery shipping tab till the units all had AC power applied. The mounting bracket was able to use the existing screws so I didn't have to even get rid of them from the ceiling box. The harness wired up quickly and following plugging it into the alarm it only took a modest twist to secure it to the mounting mounting bracket. After turning the power back on, I pulled the battery tabs out of each and every alarm. I tested every 1, and had a buddy make confident the units on the other floors sounded also.
    The alarms in this model are about twice as loud as my old smoke alarms, practically ear splitting loud so I think there's no chance to sleep via it. A green LED tells you it has AC power and there is a red LED that flashes every so frequently to say it's working. I may possibly acquire the 'hush' feature beneficial for my occasional kitchen disaster, but fanning a cookie sheet is my usual move when I burn a thing too crispy.
    The fact that the battery compartment is on the backside does not detract from the alarm. just a rather simple quarter twist and the unit comes off the bracket. On that note, it does have an anti-tamper feature that if you pick to activate, removing it from the bracket needs a read through the instructions and a lot much more work.
    All in all, it was a breeze to install, it looks and feels skilled, it is the loudest alarm I've ever heard, and the hush feature is good.
    I program on extending the wiring and installing these in every single of the bedrooms, above and beyond minimal code.

    Just bought a residence and the smoke detector was more than 20 years old. After looking at the many smoke detectors on the web, realized that I required a dual alarm with each photoelectric and ionization sensors for ideal coverage. Most of the cheaper alarms are only ionization. This unit met my demands perfectly...
    Dual sensor
    Challenging Wired (previous detector was tough wired)
    Battery Backup
    Hush button (for false alarms)
    Got the alarm a couple of days ahead of the estimated arrival date. Pulled the pieces out of the box (directions, bracket, unit, and wiring harness), did a rapid appear by way of the instructions and went to operate. It honestly only took me about fifteen minutes to install...most of that time taking the old units bracket down and placing up the new one particular. The wiring harness has 3 wires...black, white and red...but the red 1 has a plastic cover more than the finish in case you do not require to wire multiple alarms together.
    Soon after attaching the necessary wires to the home electric with wirenuts and electrical tape, just attach the bracket to the wall, make the certain the included battery is isntalled in the unit, plug the wiring harness into the back of the unit and attach to bracket. Piece o' cake.
    If your household currently has a particular wiring harness, and you don't want to mess with electrical, I believe there are adaptors available for the back of this unit as properly that can accept other shaped harnesses. Rather handy, if you require them. For me, it was pretty uncomplicated to cut the power and hook it up myself.
    Kidde PI2010 Smoke Alarm Dual Sensor with Battery Backup, White

    Related Product


    GE 50246 Smart Home Door Stop Alarm
    AAS-V700 Wireless Home Security Alarm System Kit DIY

    No comments:

    Post a Comment