Sunday, March 18, 2012

Kidde i4618 Firex Hardwire Ionization Smoke Detector with Battery Backup

Kidde i4618 Firex Hardwire Ionization Smoke Detector with Battery Backup
Price : $12.50
List Price : $19.74
You Save : $7.24 (37%)
Kidde i4618 Firex Hardwire Ionization Smoke Detector with Battery Backup

Item Description


Amazon.com Item Description
The Firex i4618 Hardwire Smoke Alarm by Kidde is an ionization smoke alarm that operates on a 120V power source with 9V battery backup. The Firex i4618 smoke alarm provides quite a few positive aspects for installers and home owners, such as its uncomplicated-access slide load front battery door.
This alarm is powered by your home’s electrical energy and will interconnect with other smoke alarms in your house. Authorities advocate interconnected alarms, simply because when one sounds, they all sound, delivering an early warning against fire by dramatically increasing your potential to hear an alarm anyplace in your property, regardless of where the fire starts.
This alarm utilizes ionization sensing engineering. Ionization sensing alarms may possibly detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may well detect visible particles (linked with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to aid insure maximum detection of the a number of sorts of fire that can happen within the residence.

Firex i4618 Hardwire Smoke AlarmUser-Friendly Capabilities
  • Very easy access slide load front battery door
  • Battery backup offers protection in case of a power failure
  • Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms


Slide load front battery door delivers simple access for changing battery backup. .
The i4618 smoke alarm gives straightforward installation capabilities. .
Provides the recommended protection of an interconnected program. When one particular alarm goes off, they all do. .
Straightforward Installation
  • Front battery pull tab permits battery activation with no removing alarm from mounting bracket.
  • Huge mounting base makes mounting much easier, protects surface paint from dirt and covers imperfections.
  • Pre-stripped wiring harness with straightforward off cap does not require stripper tool. Tinned strands boost conductivity and wire nut grip.

Fewer Callbacks
  • Sizeable centrally located Test/Hush¨ alarm manage button.
  • Dust cover protects sensor from contaminates during construction decreasing nuisance alarms.

User Friendly Characteristics
  • Uncomplicated access front loading battery door.
  • Battery backup offers protection in case of power failure.
  • Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms. See user’s guide for complete directions.


Interconnectable for Improved SafetyFire and consumer specialists advocate interconnected alarms for added protection. According to the National Fire Protection Association (NFPA), most Americans really feel they are alot more at danger of being a victim of a tornado than of a property fire. Really the opposite is true. Fires are much more frequent than any other disaster that strikes a family members at home, and can come to be deadly in minutes.
You have on average less than three minutes from the time you hear a smoke alarm to escape a fire. The sooner you hear an alarm, the sooner you can get out safely. Smoke alarms that link together so that when one goes off, they all go off, are known as interconnected alarms. These alarms provide far more warnings in far more places, giving your household additional time to escape a house fire. Homes built immediately after 1993 are expected by building codes to have interconnected alarms that are wired into their electrical program.
Interconnects with Other DevicesInterconnects with all Kidde, Firex, Fyrnetics, Lifesaver and Nighthawk alarms, strobe lights, and relay modules with interconnect functionality.
Trademarked Hush Function for ConvenienceBy pressing the Hush button, you can without difficulty and safely silence nuisance alarms caused by non-emergency conditions, such as overcooked dinners.
This alarm's Wise Hush function has the capability of temporarily desensitizing the alarm circuit for up to eight minutes. This feature is to be made use of only when a known alarm situation, such as smoke from cooking, activates the alarm. The smoke alarm is desensitized by pushing the Test/Hush button on the smoke alarm cover. If the smoke is not too dense, the alarm will silence promptly. The red LED will illuminate for 1.5 seconds just about every 8 seconds although in hush. This indicates that the alarm is in a temporarily desensitized situation. The smoke alarm will automatically reset following approximately eight minutes and sound the alarm if particles of combustion are nevertheless present. Sensible Hush can be used repeatedly till the air has been cleared of the situation causing the alarm. Pushing the Test/Hush button on the alarm will finish the hush period.
Reliable 9-Volt Battery Backup, Indicator LED, and Test FeatureBecause a smoke alarm only helps shield you if it is operating, this unit features a red LED that flashes each and every 30 to 40 seconds to indicate that it is operating properly. For extra peace of thoughts, the alarm also consists of a test/reset button that enables you to periodically test its circuitry and horn.
The alarm’s common 9-volt battery offers continuous protection against smoke and fire hazards, even in the course of power outages. The unit offers a low battery warning that matters a short chirp every single 30 to 40 seconds for at least seven days before losing power, letting you know that it is time to adjust the battery.
The unit measures just five.6 inches in diameter and 1.eight inches deep, and it functions a neutral, white finish. It contains tamper resist capabilities to deter vandalism or theft.
This alarm is UL listed, so you can be confident of its excellent, and it is backed by a 5-year limited warranty.
About Kidde: A UTC Fire Security Brand Renowned for global leadership in fire detection and suppression, Kidde delivers solutions ranging from transportable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems.
Kidde is a UTC Fire Security brand, with a history that is rich with innovations, from the patent of the Chubb Detector Lock in 1818 to the improvement of the world's 1st wireless networked smoke detectors in 2004.
What's in the BoxOne i4618 ionization smoke alarm with mounting bracket and mounting hardware, one particular 9 volt battery, a five-year limited warranty and a bilingual user's manual.

The 120 volt Firex 4618 Pro Fundamental smoke detector has an ionization Sensor, rapid connect power harness, is multi-station interconnectable, has a 5 year warranty, and is not attainable to members in Iowa, Oregon Or Vermont.
See all Item Description
Kidde i4618 Firex Hardwire Ionization Smoke Detector with Battery Backup

Buyer Reviews


My home was built in 2001, and it was equipped with Firex 120-1072B units in each and every room wired for interconnectivity. One of my units began to sound randomly even when there was no fire. I attempted altering the battery, but I still had the identical outcomes. So immediately after looking over the internet, I discovered that the Kidde i4618 is the current replacement model.
Right after acquiring the model, I was hoping that I could use an adapter in between the wiring in my Firex unit and the Kidde. Yet, I located that I was mistaken in what I believed I had read. I am about as unhandy a man as they come, and I certainly wasn't hunting forward to rewiring for the new unit. The hardest component of the method turned out discovering the correct breaker as mine are not labeled. At least for my house (please know that yours might possibly nicely be distinct), the smoke detectors had been on a devoted breaker. When I found it and switched it off, it was rather very easy from there. I removed the two screws from the bracket of the Firex unit and then uncapped the wires. The Firex wires had been painless to take away. I rewired black, white, and red as indicated and place the yellow caps back on to cover the wires. Then it was a very simple matter of screwing in the new mount, connecting the wire, and twisting the Kidde unit into spot. Once I flipped the breaker back on, anything was back to normal.
There is a single nice point on these new units. The battery door is on the face of the unit rather than the back. The old Firex unit has the battery in the back, and it was a discomfort to replace the battery. A different good improvement of the Firex unit is the power connector is significantly easier to plug and unplug without becoming insecure.
So if this is the replacement for your old Firex smoke alarm, don't hesitate to get this one from Kidde. I am pleased with the outcomes, and I assume you will be too. Please really feel free to ask queries in the comments section beneath.

We moved into a house that was built back in 1985. Along with a multitude of other tiny fixes and updates that needed performing, I observed that the upstairs smoke detector was seeking a small loose on the ceiling. Upon giving it a twist, the bracket broke, and the detector subsequently hung in a jaunty, festive way from just the wires. And I observed that this was the ORIGINAL smoke detector, dated from 1985. Okay, there is yet another point needing replaced.
Installation was a breeze - cut the power, pull the old one particular, match the right wires on the harness (white/white, black/black, red/red), screw in the new mounting bracket, plug it in, lock it in location, turn the power back on.
BZZZZZZZZZZZZZZZZZZZZZ / BEEEEEEEEEEEEEEEEEEEEP!
Oops! The 2010 model smoke detector didn't want to play properly with the other 1985 smoke detector that I hadn't even noticed downstairs, and they were both going off simultaneously. Okay, swap that one particular out as well, and... blissful silence, and a comforting green light shines from each and every one particular.
Trust me: if I could install this, Any individual can install this. I cannot even hammer a nail straight.
Kidde i4618 Firex Hardwire Ionization Smoke Detector with Battery Backup

Related Product


Master Lock 265DCCSEN Dual-Function Security Bar
80-649-3N-XT - GE SIMON XT WIRELESS Security System

No comments:

Post a Comment